background image

Replacing the Optical Drive

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before Working Inside Your Computer

. After working inside your 

computer, follow the instructions in 

After Working Inside Your 

Computer

. For more safety best practices, see the Regulatory 

Compliance home page at dell.com/regulatory_compliance. 

Procedure

Align the tabs on the optical-drive bezel with the slots on the optical 

drive and snap the optical-drive bezel into place.

Align the screw hole on the optical-drive bracket with the screw hole on 

the optical-drive assembly.

Replace the screw that secures the optical-drive bracket to the optical-

drive assembly.

Slide the optical-drive assembly into the optical-drive bay and align the 

screw hole on the optical-drive assembly with the screw hole on the 

computer base.

Replace the screw that secures the optical-drive assembly to the 

computer base.

Post-requisites

Replace the 

base cover

.

Replace the 

battery

.

21

Содержание Inspiron 14 7000 Series



























































































Отзывы: