Dell G16 7620 Скачать руководство пользователя страница 47

Страница: 47 / 79

Next steps

1. Install the

2. Install the

3. Install the

4. Install the

5. Install the

6. Install the

7. Follow the procedure in

After working inside your computer

Fan and heat-sink assembly

Removing the fan and heat-sink assembly (NVIDIA GeForce RTX
3060/3070/3070 Ti graphics card)

Prerequisites

1. Follow the procedure in

Before working inside your computer

CAUTION:

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The

oils in your skin can reduce the heat transfer capability of the thermal grease.

NOTE:

The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you

touch it.

2. Remove the

3. Remove the

4. Remove the

5. Remove the

6. Remove the

7. Remove the

NOTE:

The system board can be removed as an assembly with the memory modules, fan and heat-sink assembly,

ethernet and audio board, and USB board attached.

NOTE:

This procedure only applies to computers shipped with a NVIDIA GeForce 3060/3070/3070 Ti graphics card.

About this task

The following image indicates the location of the fan and heat-sink assembly and provides a visual representation of the removal
procedure.

Removing and installing components

Содержание G16 7620
















































































Результаты поиска

Содержание G16 7620

Отзывы:

Dell G16 7620, Руководство по обслуживанию, Страница: 47 / 79

Результаты поиска

Содержание G16 7620

Отзывы: