Dell G16 7620 Скачать руководство пользователя страница 45

Страница: 45 / 79

NOTE:

Ensure that you lift the system board from the top left and right sides of the heat sink.

17. Place the system-board assembly on a clean and flat surface.
18. Turn the system-board assembly over and remove the

ethernet and audio board

USB board

, and

fan and heat-sink

assembly

Installing the system board (NVIDIA GeForce RTX 3050 Ti graphics
card)

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

NOTE:

Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup program.

Make the appropriate changes again after you replace the system board.

NOTE:

This procedure only applies to computers shipped with a NVIDIA GeForce 3050 Ti graphics card.

About this task

The following image indicates the connectors on your system board.

1. Display cable
2. DDS (Dynamic Display Switch) cable
3. Speaker cable
4. Right-fan cable
5. Power-adapter port cable
6. Touchpad cable
7. Keyboard-controller board cable
8. Left-fan cable
9. Power-button cable

The following image indicates the location of the system board and provides a visual representation of the installation procedure.

Removing and installing components

Содержание G16 7620
















































































Результаты поиска

Содержание G16 7620

Отзывы:

Dell G16 7620, Руководство по обслуживанию, Страница: 45 / 79

Результаты поиска

Содержание G16 7620

Отзывы: