Dell G16 7620 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 79

Dell G16 7620 Скачать руководство пользователя страница 40

Steps

1. Remove the two (M2x4) screws that secure the Type-C bracket to the system board and lift the bracket off the system

board.

2. Peel the tape that secures the display-cable connector latch to the system board.
3. Open the latch and disconnect the display cable from the system board.
4. Disconnect the DDS (Dynamic Display Switch) cable from the system board.
5. Disconnect the power-adapter port cable from the system board.
6. Peel the power-adapter port cable off the system board.
7. Disconnect the right-fan cable from the system board.
8. Remove the two screws (M2x2) that secure the right fan to the palm-rest and keyboard assembly.
9. Disconnect the speaker cable from the system board.
10. Open the latch and disconnect the touchpad cable from the system board.
11. Open the latch and disconnect the keyboard-controller board cable from the system board.
12. Disconnect the left-fan cable from the system board.
13. Open the latch and disconnect the power-button cable from the USB board.
14. Remove the five screws (M2x4) that secure the system board to the palm-rest and keyboard assembly.
15. Lift the system-board assembly off the palm-rest and keyboard assembly.

NOTE:

Ensure that you lift the system board from the top left and right sides of the heat sink.

16. Place the system-board assembly on a clean and flat surface.
17. Turn the system-board assembly over and remove the

ethernet and audio board

, and

fan and heat-sink

40

Removing and installing components

«
...
38
39
40
41
42
...
»

Содержание G16 7620
















































































Отзывы:

Нет отзывов