Dell G16 7620, Руководство по обслуживанию, Страница: 20 / 79

Steps
1. Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 card slot.
2. Slide the M.2 2280 solid-state drive into the M.2 card slot.
3. Place the thermal shield on the M.2 2280 solid-state drive.
4. Align the screw holes on the thermal shield with the screw holes on the M.2 2280 solid-state drive and system board.
5. Replace the two screws (M2x4) that secure the thermal shield to the M.2 2280 solid-state drive and the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
20 Removing and installing components