Dell EMC VxFlex Ready Node 13G, Руководство пользователя

Страница: 36 / 84

Determine the 2U1N node type
For a 2U1N server, determine whether it is a converged or storage-only node.
Before you begin
Ensure that you have:
l
The IP address of the BMC (iDRAC) port
l
The user name and password for accessing the BMC (iDRAC)
The 2U1N server architecture can be converged (2CPU) or storage-only (1 CPU). You
must determine the architecture to enable proper port configuration.
Procedure
1. From your Internet browser, go to http://
<BMC/iDRAC_IP_address>.
2. In the DELL Console Login window, type the user name and password, and
click Login.
3. In the navigation pane, select the CPU node under Hardware.
4. Count the number of lines in the Processor Information table.
If the node contains:
l
Two CPUs, it is for converged architecture.
l
One CPU, it is for storage-only.
Results
The 2U1N node architecture is determined.
Server node port designations
This topic describes the server node port designations of a Windows-based VxFlex
Ready Node.
For single-node servers, connect cables and configure the system as shown in the
following tables, depending on the server type.
Note
Virtual IP and AMS features are not supported by VxFlex Ready Node v2.0, but it is
recommended to take the corresponding configurations into account when planning
your network, to streamline future support for these features.
Table 6 Single-node server configuration (2U1N Converged)
Descriptio
n BMC
(iDRAC)
Monitoring VxFlex
OS Data1 VxFlex OS
Client
Network
Port1 VxFlex OS
Client
Network
Port2 VxFlex OS
Data2 VxFlex OS
Management
Network Not in
Use
Network
Adapter
Name N/A Data1
Port1 Customer
Port1 Customer Port2 Data2 Port1 Public N/A
PCI slot N/A 1:0 1:1 83:0 83:1 6:0 6:1
Port Configuration
36 Hardware Configuration and Operating System Installation Guide - Windows Servers