Dell EMC VxFlex Ready Node 13G Скачать руководство пользователя страница 18

Страница: 18 / 84

Set up the BMC (iDRAC) IP address and BIOS

Set up the BMC (iDRAC) IP address and set up or validate the BIOS on the VxFlex
Ready Node servers.

Before you begin

Ensure that you have access to, or have the details for:

The KVM console

The server BMC (iDRAC) IP address

The server BMC (iDRAC) subnet mask

The gateway IP address

The VLAN ID of the BMC (iDRAC), if the VLAN is used

Note

The BMC (iDRAC) IP address may be an IPv4 or an IPv6 address.

Defaults:

BMC (iDRAC) username - root

BMC (iDRAC) password - The default password is calvin.

BIOS password - emcbios

During the BMC (iDRAC) IP and BIOS setup, use the following operations:

Use the arrow keys to navigate in the BIOS screens.

Use the + and - keys on the keyboard to change the option selection in the BIOS
screens.

Use SPACE or ENTER keys to change the settings.

The ENTER key opens a list to the desired values.

Procedure

1. Open the KVM console.

For console operations (KVM access), ensure that you have either a VGA tool
kit/Crash Cart to allow physical console connection from a laptop computer to a
server, or a computer screen and keyboard connection to the rack.

2. Press F2 to access the main menu.

3. From the System Setup Main Menu screen, select the iDRAC Settings menu

option.

4. Configure network settings:

a. In the iDRAC Settings screen, select Network.

b. In the iDRAC Settings--Network pane, verify the following parameter

values:

Enable NIC = Enabled

NIC Selection = Dedicated

c. From the IPv4 Settings pane, configure the IPv4 parameter values for the

BMC (iDRAC) port:

Configuring the Hardware

Hardware Configuration and Operating System Installation Guide - Windows Servers

Содержание EMC VxFlex Ready Node 13G





















































































Результаты поиска

Содержание EMC VxFlex Ready Node 13G

Отзывы:

Похожие инструкции для EMC VxFlex Ready Node 13G

Бренды по названию

Популярные бренды

Dell EMC VxFlex Ready Node 13G, Руководство пользователя

Результаты поиска

Содержание EMC VxFlex Ready Node 13G

Отзывы:

Похожие инструкции для EMC VxFlex Ready Node 13G

Бренды по названию

Популярные бренды