4
Once the tests have been completed, you can view the results and additional information on the
Results
tab, the
System Health
tab,
the
Configuration
tab, and the
Event Log
tab.
5
Close the
Embedded System Diagnostics
utility.
6
To leave the diagnostics, click
Exit.
7
Click
OK
when prompted, and the system reboots.
Running the Embedded System Diagnostics from the Dell Lifecycle
Controller
To run the embedded system diagnostics from the Dell Lifecycle Controller:
1
As the system boots, press
F10
.
2
Select
Hardware Diagnostics
→
Run Hardware Diagnostics
.
Locating the Service Tag of your system
You can identify your system using the unique Express Service Code and Service Tag. Pull out the information tag in front of the system to
view the Express Service Code and Service Tag. Alternatively, the information may be on a sticker on the chassis of the system. The mini
28
Dell EMC PowerEdge T440 Installation and Service Manual
Diagnostic indicators
