Dell Edge 3000 Series, Инструкция по установке и эксплуатации

Страница: 7 / 67

T Table 2. Bottom view
Features
1 Service Tag label The Service Tag is a unique alphanumeric identifier that enables
the Dell service technicians to identify the hardware components
in your Edge Gateway and access warranty information.
2 Earth ground A large conductor attached to one side of the power supply, which
serves as the common return path for current from many different
components in the circuit.
Left view
Table 3. Left view
Features
1 Intrusion switch An intrusion event is triggered when the enclosure (in which the
Edge Gateway is installed) is opened.
NOTE: External enclosure is sold separately.
NOTE: An intrusion event is triggered by a third-party
enclosure to the Edge Gateway through a sensor. The
sensor should have a cable, which is compatible with the
intrusion switch connector on the Edge Gateway.
2 Power/Ignition port Connect a 12-57 VDC power cable for supplying power to the
Edge Gateway.
NOTE: Power cable is sold separately.
3 Power/System status light Indicates the power status and system status.
4 WLAN/Bluetooth status light Indicates if WLAN/Bluetooth is ON or OFF.
5 Cloud-connection status light Indicates the cloud connection status.
6 Ethernet port one (with Power over Ethernet
support) Connect an Ethernet (RJ45) cable for network access. Provides
data transfer speeds up to 10/100 Mbps and support Power over
Ethernet.
NOTE: The Edge Gateway is IEEE 802.3af compliant
Powered Device (PD).
7