Dell Edge 3000 Series, Инструкция по установке и эксплуатации

Страница: 49 / 67

R Restoring Windows 10 IoT Enterprise LTSB 2016
You can restore Windows 10 IoT Enterprise LTSB 2016 on the Edge Gateway using the recovery USB image. You can download and
save the ISO recovery image file from
www.dell.com/support . The recovery USB image resets the run-time image back to the
factory image.
1. Insert the USB flash drive into the USB port on the Edge Gateway.
2. Turn on the Edge Gateway.
The USB flash drive automatically boots and installs Windows. The Edge Gateway turns off after the USB installation is
complete. The USB installation takes approximately 25 minutes to complete.
3. Remove the USB flash drive after the Edge Gateway turns off.
4. Turn on the Edge Gateway without connecting the USB flash drive.
The provisioning of the Edge Gateway begins automatically. After five minutes, the system is ready for Remote Desktop
Protocol (RDP).
5. Look up the IP address from the DHCP client list using the MAC address provided. (LAN 2, where applicable, is set to the
factory Static IP address)
6. Use Remote Desktop Connection to connect to the device through an IP address.
Creating the recovery USB flash drive
Prerequisites :
• Dell ISO recovery image. Download and save the Dell ISO recovery image file from www.dell.com/support .
• Dell OS Recovery Tool. Download and install the Dell OS Recovery Tool on your computer.
• A blank USB flash drive with at least 8 GB of storage space.
• .NET Framework 4.5.2 or higher
• A working computer with administrator user rights and at least 8 GB of available data storage to download the Dell ISO recovery
image.
1. Double-click the Dell OS Recovery Tool icon from your desktop. Click Yes in the User Account Control prompt.
2. Connect the USB flash drive to the computer.
3. Click Browse and browse to the location where the Dell ISO recovery image file is saved.
4. Select the Dell ISO recovery image file and click Open .
5. Click Start to begin creating the bootable USB recovery media.
NOTE: A message appears indicating that all the data on the USB flash drive will be lost. Ensure to backup any
existing data on the USB flash drive. Click Yes to continue.
6. Click OK to complete.
Windows 10 IOT Enterprise LTSB 2016 basic functions
BIOS Update
Download BIOS updates for the Edge Gateway from www.dell.com/support . The download includes an executable file that may be
ran from the local machine.
Watchdog Timer
The Watchdog Timer for Windows 10 IoT Enterprise LTSB 2016 is controlled through the BIOS setting.
The Watchdog Timer is enabled and disabled under the BIOS setting Watchdog Timer .
NOTE: For more information about BIOS settings on the Edge Gateway, see Default BIOS settings .
49