![Dell Edge 3000 Series Скачать руководство пользователя страница 56](http://html.mh-extra.com/html/dell/edge-3000-series/edge-3000-series_installation-and-operation-manual_81779056.webp)
You can start using the bluetooth keyboard.
S
Software enabled Access Point (SoftAP)
The Software enabled Access Point (SoftAP) feature depends on the WiFi card and associated driver support to act as a wireless
access point.
Run the following commands:
1.
Check the access point status.
ZLILDSVWDWXV
2.
By default, SoftAP is disabled. Turn on SoftAP.
ZLILDSFRQILJVHWGLVDEOHG IDOVH
3.
To secure the WiFi access point with WPA 2 personal, change two configuration items.
ZLILDSFRQILJVHWZLILVHFXULW\ ZSDZLILVHFXULW\SDVVSKUDVH 7HVW
This enables WPA2 security with the passphrase set to
7HVW
.
NOTE: If the passphrase contains any special characters or space, ensure that it is added correctly.. For exampe
'My WiFi', 'Pa$$word', or "Alan's AP".
Security
Trusted Platform Module (TPM)
NOTE: For more information about the Trusted Platform Module, see
https://developer.ubuntu.com/en/snappy/guides/
security-whitepaper/
.
TPM is supported only on devices that have TPM hardware and for those products which offers Snappy enhanced security support.
The TPM on/off setting is configurable in the firmware and manageable in the operating system.
Running command:
DGPLQ#ORFDOKRVWOVGHYWSP
If TPM is turned off, the device node (
GHYWSP
) does not exist.
SODQRXEXQWX#ORFDOKRVWOVGHYWSP
,VFDQQRWDFFHVVGHYWSP1RVXFKILOHRUGLUHFWRU\
If TPM is turned on, the device node (
GHYWSP
) exists.
SODQRXEXQWX#ORFDOKRVWOVGHYWSP
GHYWSP
Watchdog Timer (WDT)
NOTE: For more information about Watchdog Timer (WDT) commands, see
www.sat.dundee.ac.uk/~psc/watchdog/
Linux-Watchdog.html
.
It is recommended to enable the WDT by default to activate the fail-safe circuitry. Snappy, a WDT-compatible operating system
provides capability to detect and recover the system from malfunctions or unexpected crashes.
Running command:
DGPLQ#ORFDOKRVWV\VWHPFWOVKRZ_JUHS±LZDWFKGRJ
Returns:
5XQWLPH:DWFKGRJ86HF V
6KXWGRZQ:DWFKGRJ86HF PLQ
NOTE: The default value is 10. The actual value should be greater than 0.
56
Содержание Edge 3000 Series
Страница 26: ...7 7 Tighten the screws to secure the assembly to the wall 26 ...
Страница 33: ...5 5 Tighten the screws to secure the assembly to the wall 33 ...
Страница 36: ...9 9 Push the Edge Gateway towards the DIN rail brackets to secure it on the standard mount bracket 36 ...
Страница 46: ...46 ...