Dell E30S001, Руководство пользователя

Страница: 34 / 179

Menu Item Description
DCU IP Prefetcher Enables or disables the Data Cache Unit (DCU) IP prefetcher. By default,
the
DCU IP Prefetcher option is set to Enabled .
Execute Disable Enables or disables the execute disable memory protection technology.
By default, the
Execute Disable option is set to Enabled .
Logical Processor Idling Enables or disables the operating system capability to put logical
processors in the idling state in order to reduce power consumption. By
default, the option is set to
Disabled .
Configurable TDP Allows reconfiguration of Thermal Design Power (TDP) to lower levels.
TDP refers to the maximum amount of power the cooling system is
required to dissipate.
X2Apic Mode Enables or disables the X2Apic mode.
Number of Cores per
Processor Controls the number of enabled cores in each processor. By default, the
Number of Cores per Processor option is set to All .
Processor 64-bit Support Specifies if the processor(s) support 64-bit extensions.
Processor Core Speed Displays the maximum core frequency of the processor.
Processor Bus Speed Displays the bus speed of the processor.
NOTE: The processor bus speed option displays only when both
processors are installed.
Processor 1
NOTE: Depending on the number of installed CPUs, there may be
up to two processor listings. The following settings are displayed for
each processor installed in the system.
Family-Model-Stepping Displays the family, model and stepping of the processor as defined by
Intel.
Brand Displays the brand name reported by the processor.
Level 2 Cache Displays the total L2 cache.
Level 3 Cache Displays the total L3 cache.
Number of Cores Displays the number of cores per processor.
SATA Settings screen
You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on
your system.
To view the
SATA Settings screen click System Setup Main Menu
→
System BIOS
→
SATA Settings .
Menu Item Description
Embedded SATA Enables the embedded SATA to be set to Off , ATA , AHCI , or RAID modes.
By default, the Embedded SATA option is set to AHCI .
Security Freeze Lock Sends Security Freeze Lock command to the Embedded SATA drives
during POST. This option is applicable only to ATA and AHCI mode.
Write Cache Enables or disables the command for Embedded SATA drives during
POST.
34