Dell E30S001, Руководство пользователя

Страница: 140 / 179

CAUTION: If you are using the Trusted Program Module (TPM) with an encryption key, you
may be prompted to create a recovery key during program or System Setup. Be sure to
create and safely store this recovery key. If you replace this system board, you must supply
the recovery key when you restart your system or program before you can access the
encrypted data on your hard drives.
CAUTION: Do not attempt to remove the TPM plug-in module from the motherboard. Once
the TPM plug-in module is installed, it is cryptographically bound to that specific
motherboard. Any attempt to remove an installed TPM plug-in module breaks the
cryptographic binding, and it cannot be re-installed or installed on another motherboard.
4. Remove the following:
a. expansion card holder
b. cooling shroud
c. internal dual SD module
d. internal USB key (if installed)
e. internal cooling fan
f. iDRAC ports card (if installed)
g. heat sink(s)
h. processors(s)
CAUTION: To prevent damage to the processor pins when replacing a faulty system
board, ensure that you cover the processor socket with the processor protective cap.
i. memory modules
Steps
1.
Disconnect all cables from the system board.
CAUTION: Take care not to damage the system identification button while removing the
system board from the chassis.
2. Remove the screws that secure the system board to the chassis.
140