Dell E28S Series Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 220

Dell E28S Series Скачать руководство пользователя страница 72

Port C

Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set
this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.

Option
Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.

Port D

Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set
this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.

Option
Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.

Port E

Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set
this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.

Option
Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.

Pre-operating system management applications

72

Dell PowerEdge R430 Owner's Manual

«
...
70
71
72
73
74
...
»

Содержание E28S Series





























































































































































































































Отзывы:

Нет отзывов