Dell E28S Series Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 220

Dell E28S Series Скачать руководство пользователя страница 57

Device Settings

Enables you to configure device settings.

System BIOS

You can use the System BIOS screen to edit specific functions such as boot order, system
password, setup password, set the RAID mode, and enable or disable USB ports.

Viewing System BIOS

To view the System BIOS screen, perform the following steps:

Procedure

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

Note:

If your operating system begins to load before you press F2, wait for the system

to finish booting, and then restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

System BIOS Settings details

About this task

The System BIOS Settings screen details are explained as follows:

Option
Description

System Information

Specifies information about the system such as the system model name, BIOS version, and
Service Tag.

Memory Settings

Specifies information and options related to the installed memory.

Processor Settings

Specifies information and options related to the processor such as speed and cache size.

SATA Settings

Specifies options to enable or disable the integrated SATA controller and ports.

Boot Settings

Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and
BIOS boot settings.

Network Settings

Specifies options to change the network settings.

Integrated Devices

Specifies options to manage integrated device controllers and ports and specify related
features and options.

Pre-operating system management applications

Dell PowerEdge R430 Owner's Manual

57

«
...
55
56
57
58
59
...
»

Содержание E28S Series





























































































































































































































Отзывы:

Нет отзывов