Dell E28S Series Скачать руководство пользователя страница 71

Страница: 71 / 220

4. On the System BIOS screen, click SATA Settings.

SATA Settings details

About this task

The SATA Settings screen details are explained as follows:

Option
Description

Embedded SATA

Enables the embedded SATA option to be set to Off, ATA, AHCI, or RAID modes. This option
is set to AHCI by default.

Security Freeze Lock

Sends Security Freeze Lock command to the Embedded SATA drives during POST. This
option is applicable only for ATA and AHCI modes.

Write Cache

Enables or disables the command for Embedded SATA drives during POST.

Port A

Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set
this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.

Option
Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.

Port B

Option
Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.

Pre-operating system management applications

Dell PowerEdge R430 Owner's Manual

Содержание E28S Series





























































































































































































































Результаты поиска

Содержание E28S Series

Отзывы:

Dell E28S Series, Руководство пользователя, Страница: 71 / 220

Результаты поиска

Содержание E28S Series

Отзывы: