Dell E28S Series Скачать руководство пользователя страница 137 | Manualshive

Страница: 137 / 220

Dell E28S Series Скачать руководство пользователя страница 137

Figure 57 Installing an optional SD vFlash card

Internal dual SD module (optional)

The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the
following features:

l

Dual card operation — maintains a mirrored configuration by using SD cards in both the slots
and provides redundancy.

Note:

When the Redundancy option is set to Mirror Mode in the Integrated Devices

screen of System Setup, the information is replicated from one SD card to another.

l

Single card operation — single card operation is supported, but without redundancy.

Removing an internal SD card

Before you begin

1. Follow the safety guidelines listed in the Safety instructions section.

2. Follow the procedure listed in the Before working inside your system section.

CAUTION

Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.

Note:

Temporarily label each SD card with its corresponding slot number before removal. Re-

install the SD card(s) into the corresponding slots.

Procedure

1. Locate the SD card slot on the internal dual SD module and press the card to release it from

the slot.

Installing and removing system components

Dell PowerEdge R430 Owner's Manual

137

«
...
135
136
137
138
139
...
»

Содержание E28S Series





























































































































































































































Отзывы:

Нет отзывов