Dell E28S Series Скачать руководство пользователя страница 108 | Manualshive

Страница: 108 / 220

Dell E28S Series Скачать руководство пользователя страница 108

Figure 31 Installing a 3.5-inch hard drive blank

a. hard drive blank

After you finish

If applicable, install the front bezel.

Removing a 3.5-inch cabled hard drive carrier

Before you begin

CAUTION

Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.

1. Follow the safety guidelines listed in the Safety instructions section.

2. Follow the procedure listed in the Before working inside your system section.

3. If installed, remove the front bezel.

4. If connected, disconnect the power and data cable from the hard drive.

Note:

The empty cabled hard drive carrier can be used as a blank.

Procedure

1. Press the release tab on the hard drive carrier and slide the hard drive carrier out of the hard

drive slot.

CAUTION

To maintain proper system cooling, all empty hard drive slots must have hard

drive carrier blanks installed.

2. Insert a hard drive blank in the empty hard drive slot.

Installing and removing system components

108

Dell PowerEdge R430 Owner's Manual

«
...
106
107
108
109
110
...
»

Содержание E28S Series





























































































































































































































Отзывы:

Нет отзывов