manualshive.com logo in svg

Dell E28S Series, Руководство пользователя, Страница: 63 / 220

Поделиться
Скачать
Dell E28S Series Скачать руководство пользователя страница 63

User Defined Delay (60s to 240s)

Sets the User Defined Delay option when the User Defined option for AC Power Recovery
Delay is selected.

UEFI Variable Access

Provides varying degrees of securing UEFI variables. When set to Standard (the default),
UEFI variables are accessible in the operating system per the UEFI specification. When set to
Controlled, selected UEFI variables are protected in the environment and new UEFI boot
entries are forced to be at the end of the current boot order.

Secure Boot

Enables Secure Boot, where the BIOS authenticates each pre-boot image by using the
certificates in the Secure Boot Policy. Secure Boot is disabled by default.

Secure Boot Policy

When Secure Boot policy is set to Standard, the BIOS uses the system manufacturer’s key
and certificates to authenticate pre-boot images. When Secure Boot policy is set to Custom,
the BIOS uses the user-defined key and certificates. Secure Boot policy is set to Standard by
default.

Secure Boot Policy Summary

Specifies the list of certificates and hashes that secure boot uses to authenticate images.

Secure Boot Custom Policy Settings

Secure Boot Custom Policy Settings is displayed only when Secure Boot Policy is set to Custom.

Viewing Secure Boot Custom Policy Settings
To view the Secure Boot Custom Policy Settings screen, perform the following steps:

Procedure

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

Note:

 If your operating system begins to load before you press F2, wait for the system

to finish booting, and then restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click System Security.

5. On the System Security screen, click Secure Boot Custom Policy Settings.

Secure Boot Custom Policy Settings details
The Secure Boot Custom Policy Settings screen details are explained as follows:

Option
Description

Platform Key

Imports, exports, deletes, or restores the platform key (PK).

Key Exchange Key Database

Enables you to import, export, delete, or restore entries in the Key Exchange Key (KEK)
Database.

Pre-operating system management applications

Dell PowerEdge R430 Owner's Manual

63

Содержание E28S Series





























































































































































































































Отзывы:

Нет отзывов