Dell D17S, Руководство по обслуживанию

Страница: 36 / 106

Steps
1. Align the notch on the 2290 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the 2280 solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x3) that secures the 2280 solid-state drive to the system board.
Next steps
1. Install the hard-drive and optical-drive bracket .
2. Install the 3.5-inch hard-drive .
3. Install the 2.5-inch hard-drive .
4. Install the front bezel .
5. Install the side cover .
6. Follow the procedure in after working inside your computer .
Hard-drive and optical-drive supporting bracket
Removing the hard-drive and optical-drive supporting bracket
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the front bezel .
4. Remove the 2.5-inch hard-drive .
5. Remove the 3.5-inch hard-drive .
36 Removing and installing components