Dell D17S Скачать руководство пользователя страница 50

Страница: 50 / 106

Installing the external WLAN antenna

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the WLAN antennas and provide a visual representation of the installation
procedure.

Steps

1. Push and remove the antenna cover from the chassis using a screwdriver.

NOTE:

This step is only applicable when the system is being upgraded to have an external WLAN antenna.

2. Route the antenna cables through the routing guides on the system board.
3. Push the antenna-modules in to the slot on the back panel of the chassis.
4. Install the nut and washer to secure the antenna-modules to the chassis.

Next steps

1. Install the

hard-drive and optical-drive cage

2. Install the

3. Install the

4. Install the

5. Install the

6. Install the

Removing and installing components

Содержание D17S











































































































Результаты поиска

Содержание D17S

Отзывы:

Dell D17S, Руководство по обслуживанию, Страница: 50 / 106

Результаты поиска

Содержание D17S

Отзывы: