Dell D17S, Руководство по обслуживанию

Страница: 67 / 106

Steps
1. Insert the rubber grommets on the chassis.
2. Align the slots on the fan with the rubber grommets on the chassis.
3. Route the rubber grommets through the slots on the fan and pull the rubber grommets until the fan snaps into position.
4. Connect the fan cable to the connector on the system board.
Next steps
1. Install the hard-drive and optical-drive bracket .
2. Install the 3.5-inch hard-drive .
3. Install the 2.5-inch hard-drive .
4. Install the front bezel .
5. Install the side cover .
6. Follow the procedure in after working inside your computer .
Speakers
Removing the speaker
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Removing and installing components 67