Dell D17S Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 106

background image

Table 24. Passwords

Options

Description

Admin Password

This field allows the user to set, change, or delete the
administrator password.

System Password

This field allows the user to set, change, or delete the system
password.

Internal HDD-0 Password

This field allows the user to set, change, or delete the
HDD-0's password.

NVMe SSD0

This field allows the user to set, change, or delete the NVMe
SSD-0's password.

Password Configurator

Upper Case Letter

Enable or disable reinforced use of upper case letters (OFF by
default).

Lower Case Letter

Enable or disable reinforced use of lower case letters (OFF by
default).

Digit

Enable or disable reinforced use of at least one digit (OFF by
default).

Special Character

Enable or disable reinforced use of at least one special
character (OFF by default).

Minimum Character

Allows the user to select the number of characters allowed for
a password (4 is the default value).

Password Bypass

This section allows the user to enable/disable the feature
where the user must enter the system and internal hard drive
password when the system is powered on from OFF state.
The options are:

●

Disabled (Selected by default)

●

Reboot Bypass

Password Changes

Enable Non-Admin Password Changes

This section contains a toggle switch which when on, user can
change system and hard drive password without the need for
admin password (OFF by default).

Admin Setup Lockout

Enable Admin Setup Lockout

This section contains a toggle switch which allows the
administrator to control how users can or cannot access BIOS
setup (OFF by default).

Master Password Lockout

Enable Active Password Lockout

This section contains a toggle switch which allows the user to
disable active password support (OFF by default).

Update Recovery

This section provides details on Update Recovery settings.

94

BIOS setup

«
...
92
93
94
95
96
...
»

Содержание D17S











































































































Отзывы:

Нет отзывов

Похожие инструкции для D17S

Бренд: 7starlake Страницы: 8

Бренд: ADLINK Technology Страницы: 76

PC 300 GL Type 6272

Бренд: IBM Страницы: 94

Бренд: Sun Microsystems Страницы: 14

Бренд: Stage right Страницы: 12

Бренд: Dell Страницы: 51

INSPIRON Inspiron 1100

Бренд: Dell Страницы: 95

Inspiron 24-5400

Бренд: Dell Страницы: 26

Бренд: Dell Страницы: 20

Бренд: Curtiss-Wright Страницы: 72

DigiDice AB-2003

Бренд: Abit Страницы: 104

Бренд: Star Lake Страницы: 46

Бренд: Zeiss Страницы: 134

PS-2000B Series

Бренд: Digital Electronics Corporation Страницы: 16

Бренд: IEI Technology Страницы: 10

Бренд: Getac Страницы: 164

Бренд: MSI Страницы: 98

Бренд: Texas Instruments Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды