Dell D17S Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 106

background image

Updating the BIOS using the USB drive in Windows

About this task

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the
system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an
unnecessary operating system re-install. For more information on this subject, see Knowledge Article:

www.dell.com/support/article/sln153694

Steps

1. Follow the procedure from step 1 to step 6 in

Updating the BIOS in Windows

to download the latest BIOS setup program file.

2. Create a bootable USB drive. For more information, see the knowledge base article

at

www.dell.com/support

.

3. Copy the BIOS setup program file to the bootable USB drive.
4. Connect the bootable USB drive to the computer that needs the BIOS update.
5. Restart the computer and press

F12

.

6. Select the USB drive from the

One Time Boot Menu

.

7. Type the BIOS setup program filename and press

Enter

.

The

BIOS Update Utility

appears.

8. Follow the on-screen instructions to complete the BIOS update.

Updating the BIOS from the F12 One-Time boot menu

Update your computer BIOS using the BIOS update.exe file that is copied to a FAT32 USB drive and booting from the F12
One-Time boot menu.

About this task

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the
system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an
unnecessary operating system re-install. For more information on this subject, see Knowledge Article:

www.dell.com/support/article/sln153694

BIOS Update

You can run the BIOS update file from Windows using a bootable USB drive or you can also update the BIOS from the F12
One-Time boot menu on the computer.

Most of the Dell computers built after 2012 have this capability, and you can confirm by booting your computer to the F12
One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your computer. If the option is listed, then the
BIOS supports this BIOS update option.

NOTE:

Only computers with BIOS Flash Update option in the F12 One-Time boot menu can use this function.

Updating from the One-Time boot menu

To update your BIOS from the F12 One-Time boot menu, you need the following:

●

USB drive formatted to the FAT32 file system (key does not have to be bootable)

●

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive

●

AC power adapter that is connected to the computer

●

Functional computer battery to flash the BIOS

Perform the following steps to perform the BIOS update flash process from the F12 menu:

CAUTION:

Do not turn off the computer during the BIOS update process. The computer may not boot if you turn

off your computer.

BIOS setup

99

«
...
97
98
99
100
101
...
»

Содержание D17S











































































































Отзывы:

Нет отзывов

Похожие инструкции для D17S

Бренд: Challenger Страницы: 96

Бренд: ADLINK Technology Страницы: 76

Бренд: DFI Страницы: 13

Бренд: Zotac Страницы: 37

Бренд: Alienware Страницы: 20

Бренд: Hitachi Страницы: 123

Бренд: Hitachi Страницы: 194

Бренд: Hitachi Страницы: 197

Бренд: Hitachi Страницы: 227

Бренд: Hitachi Страницы: 1153

Бренд: Dell Страницы: 27

Бренд: Dell Страницы: 25

OptiPlex 980 - Desktop

Бренд: Dell Страницы: 101

Бренд: AWOW Страницы: 4

Бренд: Contec Страницы: 57

Бренд: Contec Страницы: 47

Бренд: IEI Technology Страницы: 24

Бренд: Embedded computer Source Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды