Dell D17S, Руководство по обслуживанию

Страница: 23 / 106

Steps
1. Align the slots on the 2.5-inch hard drive with the mounting points on the hard-drive carrier.
2. Pry the hard-drive carrier to align the mounting points on the hard-drive carrier with the slots on the 2.5-inch hard drive.
3. Snap the 2.5-inch hard drive onto the hard-drive carrier.
4. Align the tabs on the hard-drive carrier with the slots on the chassis and snap the hard-drive carrier onto the disk-drive
cage.
NOTE: Use the arrows seen on the caddy as guides to identify the tabs on the tray.
5. Connect the hard-drive data and power cables to the connectors on the hard drive.
Next steps
1. Install the front bezel .
2. Install the side cover .
3. Follow the procedure in after working inside your computer .
Removing the 3.5-inch hard drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the front bezel .
About this task
The following images indicate the location of the 3.5-inch hard drive and provide a visual representation of the removal
procedure.
Removing and installing components 23