manualshive.com logo in svg

Dell Command Line Interface, Руководство пользователя

Dell Command Line Interface - программа, обеспечивающая удобное взаимодействие с компьютером через командную строку. Для более эффективного использования, загрузите бесплатное руководство пользователя на manualshive.com. Получите доступ к подробному описанию функций и возможностей программы.

Поделиться
Скачать
background image

206

Glossary

probe

An electronic sensor for measuring a quantity or 
determining system state at a particular point within a 
system. Server Administrator can monitor temperature, 
voltage, fan, memory, current and chassis intrusion probes. 
The probes provide a snapshot of the measured quantity 
(such as the temperature at a particular place and time) 
or state (a chassis intrusion has or has not occurred).

program diskette set

The set of diskettes from which you can perform a 
complete installation of an operating system or 
application program. When you reconfigure a program, 
you often need its program diskette set.

protected mode

An operating mode supported by 80286 or higher 
microprocessors, protected mode allows operating 
systems to implement:

•

A memory address space of 16 MB (80286 
microprocessor) to 4 GB (Intel386 or higher 
microprocessor)

•

Multitasking

•

Virtual memory, a method for increasing addressable 
memory by using the hard drive

The Windows NT, Windows 2000, Windows XP, 
OS/2

®

, and UNIX

®

 32-bit operating systems run in 

protected mode. MS-DOS cannot run in protected 
mode; however, some programs that you can start from 
MS-DOS, such as the Windows operating system, are 
able to put the computer into protected mode.

provider

A provider is an extension of a CIM schema that 
communicates with managed objects and accesses data 
and event notifications from a variety of sources. 
Providers forward this information to the CIM Object 
Manager for integration and interpretation. 

PS

Abbreviation for power supply.

PS/2

Abbreviation for Personal System/2.

PXE

Abbreviation for Pre-boot eXecution Environment.

QFP

Acronym for quad flat pack.

RAC

Acronym for remote access controller. Dell 
OpenManage Server Administrator supports all RACs. 
These include the DRAC II, DRAC III, DRAC III/XT, 
ERA, and ERA/O. 

RAID

Acronym for redundant array of independent drives.

RAM

Acronym for random-access memory. The computer's 
primary temporary storage area for program instructions 
and data. Each location in RAM is identified by a 
number called a 

memory address

. Any information stored 

in RAM is lost when you turn off your computer.

RAMBUS

Acronym for Rambus DRAM, a type of memory 
(DRAM) developed by Rambus, Inc.

RAMDAC

Acronym for random-access memory digital-to-analog 
converter.

RAW

Unprocessed. The term refers to data that is passed 
along to an I/O device without being interpreted. In 
contrast, 

cooked

 refers to data that is processed before 

being passed to the I/O device. 
It often refers to uncompressed text that is not stored 
in any proprietary format. The term comes from UNIX, 
which supports cooked and raw modes for data output 
to a terminal. 

RDRAM

Acronym for Rambus DRAM. A dynamic RAM chip 
technology from Rambus, Inc. Direct RDRAMs are 
used in computers. Direct RDRAM chips are housed 
in RIMM modules, which are similar to DIMMs but 
have different pin settings. The chips can be built with 
dual channels, doubling the transfer rate to 3.2 GB/sec.

Содержание Command Line Interface



































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Command Line Interface

D-Link DI-634M Quick Installation Manual preview
DI-634M
Бренд: D-Link Страницы: 12
Lab.gruppen NLB 60E Operation Manual preview
NLB 60E
Бренд: Lab.gruppen Страницы: 35
Lanpro LP-N24 Installation Instructions preview
LP-N24
Бренд: Lanpro Страницы: 5
Paradyne 3172 Quick Reference preview
3172
Бренд: Paradyne Страницы: 20
Paradyne Compshere 3000 Series Notice preview
Compshere 3000 Series
Бренд: Paradyne Страницы: 2
Pantech Sprint PX-500 Quick Start Manual preview
Sprint PX-500
Бренд: Pantech Страницы: 17
Paradyne Hotwire 8343 Installation Instructions Manual preview
Hotwire 8343
Бренд: Paradyne Страницы: 6
Weidmuller IE-SW-PL09M-5GC-4GT Hardware Installation Manual preview
IE-SW-PL09M-5GC-4GT
Бренд: Weidmuller Страницы: 15
Raven RFMOW V2 User Manual preview
RFMOW V2
Бренд: Raven Страницы: 33
Planet VC-820M Quick Installation Manual preview
VC-820M
Бренд: Planet Страницы: 2
Gtran Wireless DotSurfer GPC-2100 User Manual preview
DotSurfer GPC-2100
Бренд: Gtran Wireless Страницы: 44
Extreme Networks ExtremeCloud Appliance E1120 User Manual preview
ExtremeCloud Appliance E1120
Бренд: Extreme Networks Страницы: 219
H3C SecPath F50X0 Series Manual preview
SecPath F50X0 Series
Бренд: H3C Страницы: 41
Broadband Products Xtreme Networked Boat User Manual preview
Xtreme Networked Boat
Бренд: Broadband Products Страницы: 16
RuggedCom RuggedSwitch RS500 Installation Manual preview
RuggedSwitch RS500
Бренд: RuggedCom Страницы: 16
Genexis FiberTwist XGS2420 Installation Manual preview
FiberTwist XGS2420
Бренд: Genexis Страницы: 7
IBM Redbooks Emulex VFA5 Product Manual preview
Redbooks Emulex VFA5
Бренд: IBM Страницы: 15
Omron JUNMA PULSE Datasheet preview
JUNMA PULSE
Бренд: Omron Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды