Dell Chromebook 3110, Руководство по обслуживанию

Страница: 41 / 68

NOTE: To remove the speakers, the piece of transparent tape that secures the speaker cable in place must be peeled
back.
2. Disconnect the speaker cable from the connector on the system board.
3. Peel the three pieces of adhesive tape that secure the speaker cable in place.
4. Unroute the speaker cables from the routing channels in the palm-rest assembly.
NOTE: When replacing the speakers onto the palm-rest, the speaker cables must be routed through the routing
channels in the palm-rest and underneath the tape with an arrow to avoid damaging the speaker cables when installing
the base cover.
5. Lift the speakers along with their cables off the palm-rest assembly.
Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speakers and provides a visual representation of the installation procedure.
Removing and installing components 41