Steps
1. Connect the battery cable to the connector on the system board.
2. Place the base cover on top of the palm-rest assembly.
3. Align the screw holes on the base cover with the screw holes on the palm-rest assembly, and snap the base cover latches
into place.
4. Tighten the nine captive screws to secure the base cover to the palm-rest assembly.
Next steps
After working inside your computer
.
SIM card
Removing the SIM card
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
NOTE:
The following steps are applicable only for 4G LTE enabled systems.
The following image indicates the location of the SIM card and provides a visual representation of the removal procedure.
Steps
1. Gently push the SIM card to release it from the SIM card slot on the system board.
2. Slide the SIM card out from the slot on the system board.
16
Removing and installing components
Содержание Chromebook 3110
