Dell ChengMing 3901 Tower Скачать руководство пользователя страница 71

Страница: 71 / 81

Table 12. System setup options—Passwords menu (continued)

Passwords

Allow Non-Admin PSID Revert

Enable Allow Non-Admin PSID Revert

Enables or disables Physical Security ID (PSID) revert of NVMe storage drives
from the Dell Security Manager prompt.

Default: Disabled

NOTE:

When disabled, the PSID revert is protected by the BIOS Admin

password (if set), and the user will be prompted for the password before
the revert is performed

Table 13. System setup options—Update,Recovery menu

Update,Recovery

UEFI Capsule Firmware Updates

Enable UEFI Capsule Firmware Updates

Enables or disables BIOS updates through UEFI capsule update packages.

Default: ON

BIOS Recovery from Hard Drive

BIOS Recovery from Hard Drive

Enables the computer to recover from certain corrupted BIOS conditions from
a recovery file on the user primary hard drive or an external USB key.

Default: ON

NOTE:

BIOS Recovery from Hard Drive is not available for Self-encrypting

drives (SED).

BIOS Downgrade

Allow BIOS Downgrade

Controls flashing of the system firmware to previous revisions.

Default: ON

SupportAssist OS Recovery

SupportAssist OS Recovery

Enables or disables the boot flow for SupportAssist OS Recovery tool, in the
event of certain system errors.

Default: ON

BIOSConnect

BIOSConnect

Enables or disables cloud Service OS recovery if the main OS fails to boot
within the number of failures equal or greater than the value specified by
Dell Auto OS Recovery Threshold, and local Service does not boot, or is not
installed.

Default: ON

Dell Auto OS Recovery Threshold

Dell Auto OS Recovery Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery tool.

Default: 2.

Table 14. System setup options—System Management menu

System Management

Service Tag

PubTbl cell border-right-style="none"Displays the Service Tag of the
computer.

BIOS setup

Содержание ChengMing 3901 Tower


















































































Результаты поиска

Содержание ChengMing 3901 Tower

Отзывы:

Похожие инструкции для ChengMing 3901 Tower

Бренды по названию

Популярные бренды

Dell ChengMing 3901 Tower, Руководство по обслуживанию

Результаты поиска

Содержание ChengMing 3901 Tower

Отзывы:

Похожие инструкции для ChengMing 3901 Tower

Бренды по названию

Популярные бренды