Dell Adamo XPS Скачать руководство пользователя страница 57

Страница: 57 / 59

Back to Contents Page

Daughter Board(s)

Adamo XPS™ Service Manual

Removing the Left Daughter Board

Replacing the Left Daughter Board

Removing the Right Daughter Board

Replacing the Right Daughter Board

Removing the Left Daughter Board

Follow the instructions in

Before You Begin

Remove the computer battery (see

Removing the Computer Battery

Open the display (see

Opening the Display

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Disconnect the left daughter board cable from the connectors on the system board and the left daughter board.

Disconnect the touch pad cable, speaker cable, and the bridge battery cable from the connectors on the left daughter board.

Remove the two screws that secure the left daughter board to the computer base.

Lift the left daughter board away from the computer base.

Replacing the Left Daughter Board

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Computer Battery

) before working inside

the computer.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

1 left daughter board cable

2 screws (2)

3 left daughter board

4 bridge battery cable connector

5 speaker cable connector

6 touch pad cable connector

Содержание Adamo XPS




























































Результаты поиска

Содержание Adamo XPS

Отзывы:

Похожие инструкции для Adamo XPS

Бренды по названию

Популярные бренды

Dell Adamo XPS, Руководство по обслуживанию

Результаты поиска

Содержание Adamo XPS

Отзывы:

Похожие инструкции для Adamo XPS

Бренды по названию

Популярные бренды