Dell Adamo XPS Скачать руководство пользователя страница 42

Страница: 42 / 59

Connect the left daughter board cable to the connector on the system board (see

Replacing the Left Daughter Board

Connect the right daughter board cable to the connector on the system board (see

Replacing the Right Daughter Board

Replace the Bluetooth™ card (see

Replacing the Bluetooth Card

Replace the WLAN card (see

Replacing the WLAN Card

10.

Replace the solid state drive (see

Replacing the Solid State Drive

11.

Replace the memory module (see

Replacing the Memory Module

12.

Replace the thermal cooling assembly (see

Replacing the Thermal Cooling Assembly

13.

Replace the coin-cell battery (see

Replacing the Coin-Cell Battery

14.

Replace the keyboard (see

Replacing the Keyboard

15.

Replace the palm rest assembly (see

Replacing the Palm Rest Assembly

16.

Replace the computer battery (see

Replacing the Computer Battery

17.

Turn on the computer.

18.

Enter the service tag (see

Entering the Service Tag in the BIOS

Entering the Service Tag in the BIOS

Ensure that the AC adapter is plugged in and that the main battery is installed properly.

Turn on the computer.

Press <F2> during POST to enter the system setup program.

Navigate to the security tab and enter the service tag in the Set Service Tag field.

Back to Contents Page

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

NOTE:

After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.

Содержание Adamo XPS




























































Результаты поиска

Содержание Adamo XPS

Отзывы:

Похожие инструкции для Adamo XPS

Бренды по названию

Популярные бренды

Dell Adamo XPS, Руководство по обслуживанию

Результаты поиска

Содержание Adamo XPS

Отзывы:

Похожие инструкции для Adamo XPS

Бренды по названию

Популярные бренды