Dell Adamo XPS Скачать руководство пользователя

Страница: 10 / 59

Back to Contents Page

Internal Module With Bluetooth Wireless Technology

Adamo XPS™ Service Manual

Removing the Bluetooth Card

Replacing the Bluetooth Card

Removing the Bluetooth Card

Follow the instructions in

Before You Begin

Remove the computer battery (see

Removing the Computer Battery

Open the display (see

Opening the Display

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Remove the screw that secures the Bluetooth™ card to the right daughter board.

Lift the Bluetooth card to disconnect it from the connector on the right daughter board.

Turn the Bluetooth card over.

Disconnect the blue antenna cable from the Bluetooth card.

Replacing the Bluetooth Card

Follow the instructions in

Before You Begin

Connect the blue antenna cable to the Bluetooth card.

Turn the Bluetooth card over.

Align the connector on the Bluetooth card with the connector on the right daughter board, and press gently to connect the Bluetooth card to the right
daughter board.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Computer Battery

) before working inside

the computer.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

screw

Bluetooth card

Содержание Adamo XPS




























































Результаты поиска

Содержание Adamo XPS

Отзывы:

Похожие инструкции для Adamo XPS

Бренды по названию

Популярные бренды

Dell Adamo XPS, Руководство по обслуживанию

Результаты поиска

Содержание Adamo XPS

Отзывы:

Похожие инструкции для Adamo XPS

Бренды по названию

Популярные бренды