Dell Adamo XPS Скачать руководство пользователя страница 58

Страница: 58 / 59

Follow the instructions in

Before You Begin

Place the left daughter board on the base of the computer.

Replace the two screws that secure the left daughter board to the computer base.

Connect the touch pad cable, speaker cable, and the bridge battery cable to the connectors on the left daughter board.

Connect the left daughter board cable to the connectors on the system board and the left daughter board.

Replace the palm rest assembly (see

Replacing the Palm Rest Assembly

Replace the computer battery (see

Replacing the Computer Battery

Removing the Right Daughter Board

Follow the instructions in

Before You Begin

Remove the computer battery (see

Removing the Computer Battery

Open the display (see

Opening the Display

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Remove the solid state drive (see

Removing the Solid State Drive

Remove the Bluetooth card (see

Removing the Bluetooth Card

Remove the WLAN card (see

Removing the WLAN Card

Disconnect the right daughter board cable from the connector on the system board.

Lift and slide the right daughter board away from the computer.

Replacing the Right Daughter Board

Follow the instructions in

Before You Begin

Slide and place the right daughter board towards the edge of the computer.

Connect the right daughter board cable to the connector on the system board.

Replace the WLAN card (see

Replacing the WLAN Card

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

right daughter board cable

right daughter board

Содержание Adamo XPS




























































Результаты поиска

Содержание Adamo XPS

Отзывы:

Похожие инструкции для Adamo XPS

Бренды по названию

Популярные бренды

Dell Adamo XPS, Руководство по обслуживанию

Результаты поиска

Содержание Adamo XPS

Отзывы:

Похожие инструкции для Adamo XPS

Бренды по названию

Популярные бренды