Dell 540 - USB Photo Printer 540, Руководство по обслуживанию

Страница: 30 / 36

Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
l
Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error
message.
l
CD/DVD Drive — The computer attempts to boot from the CD/DVD drive. If no CD/DVD is in the drive, or if the CD/DVD has no operating system, the
computer generates an error message.
l
USB Flash Device — Insert the memory device into a USB port and restart the computer. When
F12 = Boot Menu
appears in the upper-right corner of
the screen, press <F12>. The BIOS detects the device and adds the USB flash option to the boot menu.
Changing Boot Sequence for the Current Boot
You can use this feature to change the current boot sequence, for example, to boot from the CD/DVD drive to run the Dell Diagnostics on the Drivers and
Utilities media. On completion of diagnostic tests, the previous boot sequence is restored.
1. If you are booting to a USB device, connect the USB device to a USB connector.
2. Turn on (or restart) your computer.
3. When
F2 = Setup, F12 = Boot Menu
appears in the upper-right corner of the screen, press <F12>.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your
computer and try again.
SATA5 Displays the SATA drive integrated on SATA5.
System Info Lists the BIOS version, system name, asset tag, and service tag.
Memory Info Indicates amount of installed memory, memory speed, channel mode (dual or single), and type of memory installed.
Advanced
CPU type Indicates the type of CPU installed.
L2 Cache Indicates the amount of CPU L2 cache.
Advanced Chipset Features Indicates amount of video memory (32 MB by default).
Integrated Peripherals Allows you to enable or disable the integrated devices and ports on your system.
CPU Configuration Allows you to enable or disable the CPU features that enhance the performance of the system.
USB Configuration Allows you to enable or disable the USB controller.
Power
Power Management Setup
ACPI Suspend Type Specifies the ACPI suspend type. The default is S3.
Remote Wake Up This option turns on the computer when a user tries to access the computer through the LAN.
Auto Power On Enables you to set an alarm to turn on the computer automatically.
Auto Power On Date Enables you to set the date to turn on the computer automatically (0 by default).
Auto Power On Time Enables you to set the time to turn on the computer automatically (0:00:00 by default).
AC Recovery Off; On; Last (Off by default).
Boot
Boot Device Priority Sets the boot device sequence. Only the bootable devices that are connected to the computer are listed as options.
Removable Device Priority Sets the boot priority among the attached removable devices.
Hard Disk Boot Priority Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected.
CD/DVD Boot Priority Sets the CD/DVD drive boot priority. The items displayed are dynamically updated according to the hard drives detected.
Boot Settings Configuration Configure Fast Boot, Numlock and Keyboard errors.
Security Provides options to enable, disable or change the passwords.
Exit
Exit Options Provides options to Exit Saving Changes, Exit Discarding Changes, Load Setup Default, and Discard Changes .
NOTE: To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.