Dell 540 - USB Photo Printer 540 Скачать руководство пользователя страница 19

Страница: 19 / 36

Disconnect the processor fan cable from the CPU_FAN connector on the system board (see

System Board Components

Carefully move away any cables that are routed over the processor fan and heat sink assembly.

Loosen the four captive screws securing the processor fan and heat sink assembly and lift it straight up.

To replace the processor fan and heat sink assembly, clean the thermal grease from the bottom of the heat sink.

Apply the new thermal grease to the top of the processor.

Place the processor fan and heat sink assembly with the side labeled "Rear" facing the back of the computer. Align the captive screws on the processor
fan and heat sink assembly with the four metal screw hole projections on the system board.

Tighten the four captive screws.

10.

Connect the processor fan and heat sink assembly cable to the CPU_FAN connector on the system board (see

System Board Components

11.

Replace the computer cover (see

Replacing the Computer Cover

12.

Connect your computer and devices to an electrical outlet, and turn them on.

Back to Contents Page

NOTICE:

To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor heat sink. The oils in your skin can

reduce the heat transfer capability of the thermal pads.

1 processor fan and heat sink assembly 2 captive screws (4)

3 processor fan connector (CPU_FAN)

NOTE:

The processor fan and heat sink assembly in your computer may not look exactly like the one shown in the illustration above.

NOTICE:

Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for

optimal processor operation.

NOTE:

Ensure that the processor fan and heat sink assembly is correctly seated and secure.

Содержание 540 - USB Photo Printer 540





































Результаты поиска

Содержание 540 - USB Photo Printer 540

Отзывы:

Похожие инструкции для 540 - USB Photo Printer 540

Бренды по названию

Популярные бренды

Dell 540 - USB Photo Printer 540, Руководство по обслуживанию

Результаты поиска

Содержание 540 - USB Photo Printer 540

Отзывы:

Похожие инструкции для 540 - USB Photo Printer 540

Бренды по названию

Популярные бренды