Dell EMC PowerEdge T640, Инструкция по установке и обслуживанию

Страница: 50 / 169

Viewing Network Settings
To view the Network Settings screen, perform the following steps:
1 Power on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3 On the System Setup Main Menu screen, click System BIOS .
4 On the System BIOS screen, click Network Settings .
Network Settings screen details
The Network Settings screen details are explained as follows:
Option Description
UEFI PXE Settings
Options Description
PXE Device n (n =
1 to 4)
Enables or disables the device. When enabled, a UEFI PXE boot option is created for the
device.
PXE Device n
Settings
(n = 1 to 4)
Enables you to control the configuration of the PXE device.
UEFI HTTP
Settings
Options Description
HTTP Device (n = 1
to 4)
Enables or disables the device. When enabled, a UEFI HTTP boot option is created for the
device.
HTTP Device n
Settings
(n = 1 to 4)
Enables you to control the configuration of the HTTP device.
UEFI iSCSI Settings Enables you to control the configuration of the iSCSI device.
Table 28. UEFI iSCSI Settings screen details
Option Description
iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN format.
iSCSI Device1 Enables or disables the iSCSI device. When disabled, a
UEFI boot option is created for the iSCSI device
automatically. This is set to
Enabled by default.
iSCSI Device1 Settings Enables you to control the configuration of the iSCSI
device.
50 Pre-operating system management applications