NOTE:
You must remove the SSD cage to replace a faulty SSD cage or service other components inside the system.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.
3
Keep the Phillips #1 screwdriver ready.
Steps
1
Align the slots on the sides of the SSD cage with the guide pins on the chassis.
2
Push the SSD cage into the chassis until the screw holes on the chassis are aligned with the holes on the SSD cage.
3
Slide the SSD cage into the chassis till the IDSDM card connector engages completely with the connector on the system board.
4
Secure the SSD cage to the chassis with the screws.
Figure 39. Installing the SSD cage
1
chassis
2
guide pin slot (4)
3
SSD cage
4
screw (4)
5
guide pin (4)
Next steps
1
Install the SSD backplane.
2
Install the SSDs.
3
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the SSD backplane
Installing an SSD carrier
After working inside your system
Removing the SSD cage
94
Installing and removing sled components