Installing an SSD blank
Prerequisites
1
Follow the safety guidelines listed in the Safety instructions section.
2
Remove the SSD.
Steps
Insert the SSD blank into the SSD slot until the release latch clicks into place.
Figure 37. Installing an SSD blank
1
SSD blank
Next steps
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing an SSD carrier
After working inside your system
Installing an SSD blank
Removing the SSD cage
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.
3
Remove the SSD(s).
4
Disconnect all connected USB devices.
5
Keep the Phillips #1 screwdriver ready.
92
Installing and removing sled components
