Figure 57. Removing the Nvidia GPU I/O brackets and the support brackets
1
Torx screw (2)
2
support bracket
3
GPU
4
I/O bracket
5
screw (5)
Removing the optional GPU switch board
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
Remove the system top cover (front and rear).
4
Disconnect the GPU signal cables from the system board and then from the switch board.
NOTE:
The GPU riser signal cable should be removed from the switch board before removing the GPUs to prevent pin
damage in the GPU connectors on the switch board.
5
Remove all GPUs from the chassis.
6
Disconnect the switch board power cable.
7
Keep the Philips #2 screwdriver ready.
Steps
1
Loosen the screws securing the GPU switch board to the chassis.
2
Slide the GPU switch board toward the front of the chassis to disengage the slots on the GPU switch board from the tabs on the
chassis.
3
Lift the GPU switch board out of the chassis.
102
Installing and removing system components