Dell EMC G7 7590 Скачать руководство пользователя

Страница: 96 / 104

General-System Information

M.2 SATA SSD

Displays the M.2 SATA SSD device information of the computer.

M.2 PCIe SSD-0

Displays the M.2 PCIe SSD information of the computer.

LOM MAC Address

Displays the LOM MAC address of the computer.

Video Controller

Displays the video controller type of the computer.

dGPU Video Controller

Displays the discrete graphics information of the computer.

Video BIOS Version

Displays the video BIOS version of the computer.

Video Memory

Displays the video memory information of the computer.

Panel Type

Displays the Panel Type of the computer.

Native Resolution

Displays the native resolution of the computer.

Audio Controller

Displays the audio controller information of the computer.

Wi-Fi Device

Displays the wireless device information of the computer.

Bluetooth Device

Displays the bluetooth device information of the computer.

Battery Information

Displays the battery health information.

Boot Sequence

Boot Sequence

Displays the boot sequence.

Boot List Option

Displays the available boot options.

Advanced Boot Options

Enable Legacy Option ROMs

Enable or disable the Legacy Option ROMs.

Enable Attempt Legacy Boot

Enable or disable Legacy Boot.

UEFI Boot Path Security

Enable or disable the system to prompt the user to enter the Admin password when
booting a UEFI boot path from the F12 boot menu.

Date/Time

Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.

Table 4. System setup options—System Configuration menu

System Configuration

Integrated NIC

Controls the on-board LAN controller.

Enable UEFI Network Stack

Enable or disable UEFI Network Stack.

SATA Operation

Configure operating mode of the integrated SATA hard drive controller.

Drives

Enable or disable various drives on board.

SMART Reporting

Enable or disable SMART Reporting during system startup.

USB Configuration

Enable Boot Support

Enable or disable booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.

Enable External USB Port

Enable or disable booting from USB mass storage devices connected to external USB
port.

Thunderbolt Adapter Configuration

Enable or disable Thunderbolt technology support.

Audio

Enable or disable the integrated audio controller.

Keyboard Illumination

Enables you to choose the operating mode of the keyboard illumination feature.

Keyboard Backlight Timeout on AC

When the backlight is enabled, this feature defines the timeout value for the
keyboard backlight when an AC adapter is plugged into the computer.

Keyboard Backlight Timeout on Battery

When the backlight is enabled, this feature defines the timeout value for the
keyboard backlight when the computer is running only on battery power.

System setup

Содержание G7 7590









































































































Результаты поиска

Содержание G7 7590

Отзывы:

Похожие инструкции для G7 7590

Бренды по названию

Популярные бренды

Dell EMC G7 7590, Руководство по обслуживанию

Результаты поиска

Содержание G7 7590

Отзывы:

Похожие инструкции для G7 7590

Бренды по названию

Популярные бренды