Dell EMC G7 7590 страница 97 Скачать руководство пользователя

Страница: 97 / 104

System Configuration

Miscellaneous Devices

Enable or disable various onboard devices.

Table 5. System setup options—Video menu

Video

LCD Brightness

Set the panel brightness independently for Battery and AC power.

Table 6. System setup options—Security menu

Security

Admin Password

Set, change, or delete the administrator password.

System Password

Set, change, or delete the system password.

Internal HDD-0 Password

Set, change, or delete the internal hard-disk drive password.

Strong Password

Enable or disable strong passwords.

Password Configuration

Control the minimum and maximum number of characters allowed for Admin and
System passwords.

Password Bypass

Bypass the System (Boot) Password and the internal HDD password prompts during
a system restart.

Password Change

Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.

Non-Admin Setup Changes

Determines whether changes to the setup option are permitted when an
administrator password is set.

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

PTT Security

Enable or disable Platform Trust Technology (PTT) visibility to the operating system.

Computrace(R)

Enable or disable the BIOS module interface of the optional Computrace(R) Service
from Absolute Software.

Admin Setup Lockout

Enable to prevent users from entering Setup when an Admin Password is set.

Master Password Lockout

Disables the master password support. Hard Disk passwords need to be cleared
before changing the setting.

Table 7. System setup options—Secure Boot menu

Secure Boot

Secure Boot Enable

Enable or disable the secure boot feature.

Secure Boot Mode

Modifies the behavior of Secure Boot to allow evaluation or enforcement of UEFI
driver signatures.

Expert Key Management

Expert Key Management

Enable or disable Expert Key Management.

Custom Mode Key Management

Select the custom values for expert key management.

Table 8. System setup options—Intel Software Guard Extensions menu

Intel Software Guard Extensions

Intel SGX Enable

Enable or disable Intel Software Guard Extensions.

Enclave Memory Size

Set the Intel Software Guard Extensions Enclave Reserve Memory Size.

Performance

Multi Core Support

Enable multiple cores.

Default: Enabled.

Intel SpeedStep

Enable or disable Intel Speedstep Technology.

System setup

Содержание G7 7590









































































































Результаты поиска

Содержание G7 7590

Отзывы:

Похожие инструкции для G7 7590

Бренды по названию

Популярные бренды

Dell EMC G7 7590, Руководство по обслуживанию

Результаты поиска

Содержание G7 7590

Отзывы:

Похожие инструкции для G7 7590

Бренды по названию

Популярные бренды