Dell EMC 6WDJR, Инструкция по установке и обслуживанию

Страница: 65 / 129

Card
description
Card type
Maximum
allowed
Slot Priority Slot width Link width Card width Card length Card height
1 1 x8 x4 SW HL LP
1 2 x16 x8 SW HL FH
1 1 x8 x4 SW HL LP
FC8 HBA HBA: FC8 1 2 x16 x8 SW HL FH
1 1 x8 x4 SW HL LP
BOSS2 card Internal
Storage 1 2 x16 x8 SW HL FH
1 1 x8 x4 SW HL LP
1G Network
card NIC: 1Gb 1 2 x16 x8 SW HL FH
1 1 x4 x4 SW HL LP
1 1 x8 x4 SW HL LP
Removing the expansion card riser
Prerequisites
1 Follow the safety guidelines listed in Safety instructions .
2 Follow the procedure listed in the Before working inside your system .
3 Remove the air shroud .
Steps
1 Open the blue expansion card riser retention-latch located on the system.
2 Holding the blue touch points, lift the expansion card riser from the system.
Figure 37. Removing the expansion card riser
3 If you are not replacing the expansion card riser, install a expansion card riser filler bracket by performing the following steps:
Installing and removing system components 65