Dell EMC 6WDJR, Инструкция по установке и обслуживанию, Страница: 79 / 129

Figure 52. Removing the processor
Next step
1 Replace the processor .
Installing the processor
Prerequisites
1 Follow the procedure in Before working inside your system .
2 Remove the air shroud .
3 Remove the heat sink .
Steps
1 Align the pin-1 indicator of the processor with the triangle on the system board.
CAUTION: Do not use force to seat the processor. When the processor is positioned correctly, it engages into the socket at
ease.
2 Place the processor in the socket.
3 Close the processor shield by sliding it under the retention screw on the system board.
4 Lower the processor shield lever and push it under the tab to lock the processor shield.
Figure 53. Installing the processor
Next steps
1 Install the heat sink .
2 Install the air shroud .
Installing and removing system components 79