Restoring the system using Easy Restore
The easy restore feature enables you to restore your service tag, license, UEFI configuration, and the system configuration data after
replacing the system board. All data is backed up in a backup flash device automatically. If BIOS detects a new system board, and the
service tag in the backup flash device, BIOS prompts the user to restore the backup information.
Below is a list of options available:
•
Restore the service tag, license, and diagnostics information, press
Y
•
Navigate to the Lifecycle Controller based restore options, press
N.
•
Restore data from a previously created
Hardware Server Profile
, press
F10
NOTE:
When the restore process is complete, BIOS prompts to restore the system configuration
data.
•
To restore the system configuration data, press
Y
•
To use the default configuration settings, press
N
NOTE:
After the restore process is complete, system reboots.
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using
System Setup
.
About this task
If you know the system service tag, use the
System Setup
menu to enter the service tag.
Steps
1
Power on the system.
2
To enter the
System Setup
, press
F2
.
3
Click
Service Tag Settings
.
4
Enter the service tag.
NOTE:
You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the correct service
tag. Once the service tag is entered, it cannot be updated or changed.
5
Click
OK
.
Trusted Platform Module
Upgrading the Trusted Platform Module
Prerequisite
NOTE:
•
Ensure that your operating system supports the version of the TPM module being installed.
•
Ensure that you download and install the latest BIOS firmware on your system.
•
Ensure that the BIOS is configured to enable UEFI boot mode.
About this task
CAUTION:
Once the TPM plug-in module is installed, it is cryptographically bound to that specific system board. Any attempt to
remove an installed TPM plug-in module breaks the cryptographic binding, the removed TPM cannot be reinstalled or installed on
another system board.
100
Installing and removing system components
Содержание 6WDJR
Страница 13: ...Figure 9 Jumper settings Figure 10 Memory information Dell EMC PowerEdge R340 system overview 13 ...
Страница 14: ...Figure 11 System information 14 Dell EMC PowerEdge R340 system overview ...
Страница 15: ...Figure 12 Electrical overview Dell EMC PowerEdge R340 system overview 15 ...
