manualshive.com logo in svg

Delachaux Conductix-Wampfler 0314 Series, Руководство по установке

Поделиться
Скачать
Delachaux Conductix-Wampfler 0314 Series Скачать руководство пользователя страница 27

Installation Manual 
 
Festoon Systems for I-Beams 

Program 0314 

 

 

MAL0300-0001-EN 

www.conductix.com 

translated document 

page 27 of 56 

 

5

 

Transport, packaging and storage 

 

5.1

 

Transport 

 

5.1.1

 

Safety instructions for transport 

 

 

 

 

 

WARNING!

 

Risk of death due to suspended loads! 

When lifting loads, there is a risk of death due to parts falling or swinging out of control. 
Therefore: 
- Never walk under suspended loads. 
- Block off the dangerous area under the system. 
- Follow the specifications for the attachment points provided 
- Do not lash to protruding machine parts or eyelets on attached components. Be sure the lashing 

elements are firmly seated. 

- Use only authorized lifting accessories and lashing elements with sufficient load capacity 
- Do not use torn or worn ropes or straps 
- Do not attach ropes or straps at sharp corners and edges, and do not knot or twist them 

 

 

 

 

CAUTION!

 

Possible damage from improper transport! 

Improper transport can result in substantial property damage. 
Therefore: 
- When unloading packaged parts upon delivery and during internal transport, proceed with caution 

and observe the symbols and information on the packaging. 

- Use only the provided lashing points. 
- Only remove packaging just before installation. 

 

 

 
 

5.1.2

 

Transport inspection 

 

Check the delivery for completeness and transport damage immediately on receipt. 
If transport damage is externally visible, proceed as follows: 

 

 

Do not accept delivery, or accept it only with reservations. 

 

Note the scope of damage on the transport documents, or on the transporter

’

s delivery note.  

 

File a complaint. 

 

 

 

NOTE!

 

File a complaint on every defect as soon as it is detected. Damage compensation claims may only be 
made within the applicable claim periods. 

 

Содержание Conductix-Wampfler 0314 Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды