Installation Manual
Festoon Systems for I-Beams
Program 0314
MAL0300-0001-EN
www.conductix.com
translated document
page 11 of 56
2.5
Protective measures to be taken by the operator/user
The festoon system is used in an industrial setting. The operator of the festoon system is thus subject to legal requirements related
to workplace safety. In addition to the safety instructions in these assembly instructions, all safety, accident protection, and
environmental regulations valid in the place of operation of the festoon system must also be observed. This particularly applies to
the following:
The operator must ensure that
the
festoon system will only be used for its intended purpose.
The operator must inform him/herself of applicable workplace safety guidelines and identify any additional hazards that may
arise under the specific working conditions at the place of use of the
festoon system.
This knowledge must be expressed in
the form of operating instructions for the operation of the device. .
During the entire time the festoon system is in use, the operator must check that these operating instructions still correspond to
the current state of regulations and adapt them as necessary.
The operator must clearly manage and define responsibilities for installation, operation, troubleshooting and maintenance.
The operator must ensure that all employees involved with the festoon system have read and understood these assembly
instructions. The owner must also train the personnel at regular intervals and inform them of hazards.
The owner must provide personnel with the necessary protective equipment.
Furthermore, the operator is responsible for ensuring that the festoon system is always in a technically perfect condition. The
following thus apply:
The operator must ensure that the service intervals described in this installation manual are observed.
The operator must have all safety systems regularly inspected for functionality and completeness.
