23
30SD, 36SD, 45SD
Rev. Nov2014
Vertical Service Position
For some procedures it is necessary to put the snow blower into the vertical service position as instructed below. This
allows for easy access to the top and the bottom of the snow blower.
1. Remove or place the drift cutters into the stored position.
2. Push up on the handle bars and rock the snow blower forward onto the front face of the collector housing as shown
below.
Service Adjustments
Caution! Unit is heavy, this may require the
assistance of a second person.
Remove all fuel from fuel tank if possible by:
- Turn fuel valve off
- Remove fuel hose from fuel valve
- Install short piece of fuel hose to valve
- Turn fuel valve on and drain into gasoline safe container
Make certain fuel valve is off.
Tighten fuel and oil caps
Remove key
Close fuel valve
Disconnect spark plug
DANGER: GASOLINE IS HIGHLY FLAMMABLE AND
EXPLOSIVE. Do not add fuel while the engine is
running or is hot. Keep open flames, sparks, and heat
away from the fuel and store fuel in containers
specifically designed for that purpose. ADD FUEL
OUTDOORS ONLY. IF THE FUEL IS SPILLED, DO NOT
START THE ENGINE. Manually push the snow blower
away from the spill and wipe up immediately.
DANGER
