background image

30SD, 36SD, 45SD 

 

Rev. Nov2014 

Preparation Safety Precautions 

Preparation—Safety Precautions 

 

1.  Inspect the area where the equipment is to be 

used and remove all objects such as rocks, 
mats, and wire which can be thrown by the 
machine causing serious injury or death. 

2.  Disengage all clutches and shift to neutral 

before starting the engine. 

3.  Disengage all control levers before starting the 

engine. 

4.  Use extension cords and receptacles as 

specified by the manufacturer for all units with 
electric drive motors or electric starting 
motors. 

5.  Use a grounded three-wire extension cord 

when using the electric start option. 

6.  People, pets, and most importantly children 

must not be near the area being cleared.  Do 
not operate the snow blower in their presence. 

7.  Never operate snow blower with damaged 

guards, shields or covers. 

8.  All users of the snow blower must be alert and 

pay attention to safety alerts, symbols, and 
safety signs. 

 

9.  Be sure to inspect snow blower before each 

use. 

10.  Check the controls and shields to make sure 

that they are functioning properly before 
operating.  Do not operate if any are damaged 
or missing. 

11.  Never attempt to make any adjustments to the 

snow blower while it is running. 

12.  Adjust the collector housing height to clear 

gravel or crushed rock surfaces. 

13.  Wear appropriate clothing including hard hat, 

safety glasses and hearing protection.  Long 
hair, loose clothing or jewelry may get tangled 
in moving parts. 

14.  Do not operate without wearing adequate 

winter clothing.  Wear footwear that will 
improve footing on slippery surfaces. 

15.  Allow snow blower to adjust to outdoor 

temperature before starting the engine. 

DANGER: GASOLINE IS HIGHLY FLAMMABLE AND 
EXPLOSIVE. Do not add fuel while the engine is 
running or is hot. Keep open flames, sparks, and heat 
away from the fuel and store fuel in containers 
specifically designed for that purpose. ADD FUEL 
OUTDOORS ONLY.  IF THE FUEL IS SPILLED, DO NOT 
START THE ENGINE. Manually push the snow blower 
away from the spill and wipe up immediately. 

DANGER 

Gasoline and other fuels—Safety Precautions 

 

Use extra care when handling gasoline and other 
fuels as they are flammable and vapors can explode. 

1.  Only use gasoline approved containers for storage 

and keep out of reach from children. 

2.  Do not fill fuel tank completely full.  Overfilling may 

result in fuel leakage.  Leave a reasonable amount 
of space for fuel to expand. 

3.  If fuel is spilled, do not start the engine.  Move the 

snow blower away from the area, wipe up the spill 
thoroughly and wait until fuel vapors have 
evaporated before starting engine. 

4.  Keep the nozzle in contact with the rim on the fuel 

tank or container opening at all times, until 
refueling is complete.  Do not use nozzle lock-open 
device. 

5.  Do not fill gasoline containers or equipment inside a 

vehicle or on a truck/trailer bed.   

6.  Always place gasoline containers on the ground 

away from your vehicles prior to filling. 

7.  Never remove gas cap or add fuel when engine is 

running or the engine is hot. 

8.  Avoid prolonged breathing of gasoline vapors. 

9.  Never refuel or drain the machine indoors. 
10.  Keep face away from nozzle and gas tank opening. 
11.  Keep gas and other fuels away from skin and eyes.  

If fuel is spilled on clothing, change clothing 
immediately. 

12.  Never use the mouth to siphon gas. 
13.  Never refuel the snow blower until all moving 

parts on the snow blower have stopped. 

14.  Never smoke when handling fuels and stay away 

from an open flame where fumes can be ignited by 
a spark. 

Содержание 30SD










































Отзывы: