www.dejero.com
!
18
|
LIVE+ GoBox User Guide
!
Live Resolution
Ethernet Type
Maximum Connection Bitrate
Auto: SD
Normal
2.5 Mb/s
Auto: SD+
Normal
5.0 Mb/s
Auto: HD
Normal
5.0 Mb/s
Auto: HD+
Normal
10.0 Mb/s
Auto: SD
Satellite
3.1 Mb/s
Auto: SD+
Satellite
6.2 Mb/s
Auto: HD
Satellite
6.2 Mb/s
Auto: HD+
Satellite
12.5 Mb/s
If you choose Manual, you set the maximum connection bitrate yourself. This setting can be
useful if you want to control your data usage or if you are broadcasting from an area with poor
coverage and want to cap the bandwidth at a low rate.
Audio-only Mode
In areas of poor coverage, when the transmitter’s available bandwidth falls below 100 Kb/s, the
transmitter automatically sends only audio to the server and the last good frame of the video
remains on the screen. When the bandwidth increases and remains at 200 Kb/s or better, the
transmitter resumes sending video.
Note
: If you set a maximum connection bitrate less than 400 Kb/s manually, the
transmitter does not switch to audio-only mode.
Configuring the connection type
You can set the type of connection to use for transmitting your data.
1. On the Device Ready screen, press the
Configuration
touchpad button
2. On the Configuration screen, press the
Operation
touchpad button.
3. Set the
Connection
mode to
All
,
Ethernet
, or
Modem
.
•
All
: The transmitter sends data through all available connections, including cellular,
Ethernet and Wi-Fi. If an Ethernet cable is not connected, the transmitter sends data
over cellular networks only. If there is no cellular network coverage, but an Ethernet
cable is connected to the transmitter, data is sent over Ethernet only. If there is
cellular network coverage and an Ethernet cable is also connected, the transmitter
uses both connection types simultaneously.
