www.dejero.com
!
13
|
LIVE+ GoBox User Guide
!
USB ports
The GoBox has two user accessible USB ports. You can use these ports for connecting USB
memory sticks (for file transfers), for connecting support peripherals (such as a keyboard or
mouse), or for connecting other supported devices.
Device Ready screen
When the LIVE+ GoBox is on, the Device Ready screen appears.
Various messages, including status of the transmitter and error messages, appear on this
screen.
When you power on the GoBox, it performs a diagnostic test and Device Ready appears when
the transmitter is ready to use.
Note
: The LIVE+ Portal administrator must activate the transmitter before it can be
used. If your administrator has not activated the transmitter, an
Inactive Device
Error
appears.
!!
For a list of possible error messages, see page 30.
Individual Connection meters
The GoBox communicates data through modems or an
Ethernet connection. Individual connection meters show the
active data transmission rate. The transmission rate appears
in increments of 500 Kb/s.
A dot at the bottom of each meter indicates the status of the
connection:
•
a green dot indicates a successful network
connection
•
a grey dot indicates that the cell carrier signal is out
